A set for cutting round holes in metal sheets with a diameter range from 22-60 mm. The cutting head is connected by a hose to the pump of the hydraulic actuator. The set is intended for cutting holes in the production of switchgear cabinets for the installation of boxes or switches. When cutting holes, the surface of the sheet is not deformed or damaged. The set is easy to transport and store – packed in a durable suitcase. Includes dies and punches cutting holes with diameters of 22 mm / 0.9 “, 27.5 mm / 1.1”, 34 mm / 1.3 “, 43 mm / 1.7”, 49 mm / 2.0 “, 60 mm / 2.4. The pressure on the material during cutting is about 6 tons. Suitable for cutting holes in steel sheets, stainless sheets and non-ferrous metals. The thickness of the cut material, depending on its type, up to about 4 mm. The set includes 6 pairs of dies fi 22, 27.5, 34, 43, 49, 60 mm, 2 pins for mounting 7/16×3 / 4 inch and 3 / 4×3 / 4 inch, manual actuator with a hose, 1 sealing set
Purpose / application
For quick cutting of large precise holes in metal sheets with diameters from 22-60 mm.
Usage method
According to the attached instruction manual
Contents of the package
Actuator with pump and hose
Cutting punches 22 mm / 0.9 “, 27.5 mm / 1.1”, 34 mm / 1.3 “, 43 mm / 1.7”, 49 mm / 2.0 “, 60 mm / 2 , 4 “
Dies suitable for punches 22 mm / 0.9 “, 27.5 mm / 1.1”, 34 mm / 1.3 “, 43 mm / 1.7”, 49 mm / 2.0 “, 60 mm / 2.4 “
7 / 16×3 / 4 inch and 3 / 4×3 / 4 inch clamping pins
Sealing kit
Everything is packed in a suitcase
Hydraulic hole cutting tool 22-60 mm 360 degrees (YT-18907)
Preces kods: YT-18907-VG103.55 €
Apraksts
Apmaksa un piegāde
