This brake bleeder kit is used for changing brake and clutch oil, as well as suck out old oil and air from replaced brake system on motorcycle car truck and pickup
Automatic brake oil refill device: there is a long screw fittings on 0.75L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support
Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it
On the 1L waste oil extractor bottle, there is a the hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck
Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool
The brake system bleeding tool kit includes 4 master cylinder adapters for most vehicle models, 21 to 30 mm, 24 to 32 mm, 28 to 37 mm, 32 to 41 mm
Does not require specialised brake reservoir caps
Draws fluid from the bleed nipple enabling either bleeding or full replacement of fluid in system
Includes reservoir top-up kit and guidance notes
Air Supply 6 – 8 bar
Air Consumption 180 l/min
Tank Capacity 1 & 0.75 l
Vacuum 60 %
External connector 1/4"
“Disc break piston spreader” ir pievienoti grozam. Apskatīt grozu
Ir noliktavā!
Pneumatic vacuum brake and clutch bleeder 0.75l
Preces kods: AT2027-LI43.56 €
Noliktavā 39 prece/-es
Kategorija: Bez kategorijas
Apraksts
Apmaksa un piegāde