Quick inorganic protection is a category II eye and face protection designed for individual eye and face protection against mechanical hazards. The casing protects against high speed particle impacts.
The protective fastener measures 395 mm x 200 mm and is made of polycarbonate. It is designed as quick changeable for VOREL 74461 and VOREL 74462 products.
Destination / Application
For replacement in VOREL 74461 and VOREL 74462 covers.
How to use
Before using the glass, inspect it for damage. The scratched or defective protective glass can not be used. Before you start mounting the fastener in the cover, remove the protective film on both sides of the fastener. Along the upper edge, the protective window has holes with which it is attached to the face guard. If you need to swap the fastener, turn the catches on the front cover so that you can shoot fast. Remove the old protective glass. Assemble the new start from the middle hole and then swing the side holes through the hooks to fasten the cover to the front cover. Make sure all hooks are turned in such a way that the safety guard can not be disassembled automatically. After finishing work the cover should be cleaned with
Soft and damp cloth Remove larger soils with soapy water and dry with a cloth. Do not use scouring cleaners.
Index number 74464
Gross Weight (kg) 0.1170
Master Carton MC 150
Protection category II
Weight [g] 117
Dimensions [mm] 395×200
SIZE: 395x200MM, MATERIAL: POLYCARBONATE (PC), WITHOUT ALUMINIUM RIM, PROTECTED WITH FOIL