Matuoklio kojelės pagamintos iš Chromo Molibdeno
• 1 / 2 “Drive”.
• Tinka 6-14mm smeigėms.
• Pilnai reguliuojamas.
‧PLACE THE STUD EXTRACTOR OVER THE
STUD TO BE REMOVED ANDTIGHTEN THE
JAWS BY TURNING THE REAR HEX DRIVE
NUT IN A COUNTER CLOCKWISE MOTION.
‧ENGAGE THE AIR IMPACT WRENCH INTO THE
HEX DRIVE.
‧ROTATE THE IMPACT WRENCH COUNTER
CLOCKWISE TO EXTRACT THE STUD (THE
SELF TIGHTENING ACTION OF THE TOOL
WILL GRIP AND EXTRACT THE STUD).
‧THE STUD CAN BE RELEASED BY TURNING
THE HEX DRIVE NUT CLOCKWISE WHILE
HOLDING THE LARGER HEX DRIVE NUT.