Very strong and functional Yato headlamp with continuously adjustable light up to 500lm. Four operating modes allow you to adjust the lighting to the activities and battery charge level. The built-in motion sensor allows you to turn the lamp on and off with a wave of your hand. A great advantage is the ability to use classic AAA batteries or a lithium-polymer battery. In addition, the headlamp has a number of amenities – adjustable lighting angle, detachable from the belt, magnetic base and battery charge indicator.
SOURCE OF LIGHT:
LEDs: COB LED, OSRAM LED
Two types of diodes allow you to adjust the type of diode to the illuminated area – the light can be focused or diffused. The combination of both LEDs gives the strongest light of 500lm
Lumens: 500lm
4 operating modes: 400lm (Osram 100%) / 120lm (Osram 30%) / 200lm (COB 100%) / 500lm (Osram + COB)
Holding the on / off button – smooth light adjustment from 10% to 100% (for each function)
Sensor button: operation in the mode with a motion sensor – turning on and off the head lamp after waving your hand in front of the sensor (for each function). This function is useful when our hands are dirty, we put on gloves or the access to the switch is difficult.
SOURCE OF ENERGY:
Battery: LI-PO 3.7V 1000MAH
Batteries: 3 X AAA
Possibility to use LI-PO battery or AAA battery
LI-ION battery life: 1h 20min – 10h. Operating mode: 2h (100% osram) / 10h (30% osram) / 4h (COB) / 1h 20min (Osram + COB)
LI-ION battery charging time: 2-2.5h
Charging: USB cable
CONSTRUCTION AND FEATURES:
Material: aluminum, ABS
Flexible, adjustable and breathable headband
Lighting angle adjustment – 4 levels (max 60 degrees)
The headlamp can be detached from the headband
Magnetic base (can be used as a reflector)
Phosphorescence – the rim around the LEDs – shines in the dark with its own light for several dozen minutes after prior exposure
Battery charge indicator – 30-100% battery (green light), 5-30% battery (red light), less than 5% battery (red light blinking)
Motion sensor
IP54 waterproof
Drop resistance: 1m
Size: 68 x 39 x 40mm
Weight: 89g
ABS – it is characterized by very high hardness, which makes it highly resistant to scratches, impacts and dents. Additionally, it is resistant to various chemical factors.
IP54 – protection against access to hazardous parts by wire and protection against dust as well as protection against splashes of water from any direction